HandiFoam® Open Cell (HFO)

Low-Pressure Spray Polyurethane Foam (SPF)
Home » Product Lines » HandiFoam® Open Cell Low-Pressure Spray Polyurethane Foam (SPF)

HandiFoam® Open Cell (HFO) is an open cell formulation used to fill and insulate large voids and surfaces. HandiFoam Open Cell is excellent for sound deadening and reducing noise levels where a lower density foam is required. Ideal for patch and repair or touch-up work of currently insulated buildings where a low density foam has previously been installed.

This product is formulated utilizing an HFO blowing agent which is part of our ongoing commitment to developing foam chemistries with lower global warming impact and enhanced product performance.

HandiFoam® Open Cell (HFO) is available in a variety of disposable sizes and is dispensed using the patented Handi-Gun® Dispensing Unit.













R Value

Aged:
4.4 at 1" thick

Density

Free Rise:
0.72 lb./ft3 (11.5 kg/m3)

In Place:
1.64 lbs/ft3 (26.3 kg/m3)

Tack-Free Time 75 seconds
Cuttable 15 minutes
Fully Cured Time 1 hour
Cell Structure >90% OPEN cell content
Fire Rating

ASTM E84 Class 2 (B) at 4" thick

Flame Spread: 65

Smoke Developed: 450

Shelf Life

12 months – Disposable

Warning

 WARNING: CANCER AND REPRODUCTIVE HARM  - www.p65Warnings.ca.gov

Item Number
Description
Size
Dispensing Type
Yield
P12630

HandiFoam® Open Cell (HFO)

II-40
Disposable
40 bdft (3.7 m2)
P12005

HandiFoam® Open Cell (HFO)

II-250
Disposable
250 bdft (23.2 m2)
P12010

HandiFoam® Open Cell (HFO)

II-500
Disposable
500 bdft (46.5 m2)
P12015

HandiFoam® Open Cell (HFO)

II-1550
Disposable
1,550 bdft (144 m2)

  • Insulation
    • Other
      • Archeological / valuables packaging stabilizer
    • Residential
      • Residential wall insulation
      • Insulating cathedral ceilings
  • Sound deadening interior walls


Use our Yield Calculator to determine how much low pressure polyurethane foam you need to complete your next project.

*Yields are based on theoretical calculations, for comparison purposes, and will vary depending on ambient conditions and particular application. Other two-component foam product yields are shown on the specific Technical Data Sheet. These examples are representative of other products of similar size.

  • This field is for validation purposes and should be left unchanged.