HandiFoam® High Density

Low-Pressure Spray Polyurethane Foam (SPF)
Home » Product Lines » HandiFoam® High Density Low-Pressure Spray Polyurethane Foam (SPF)
HandiFoam High Density

HandiFoam® High Density is specifically designed for applications where a high compressive strength foam is required. It is ideally suited for roofing repairs and night seals or any application where foot traffic is expected. The smoother surface finish reduces the need for extra coating layers or secondary smoothing of the foam surface prior to coating application.

This product is formulated utilizing an HFO blowing agent which is part of our ongoing commitment to developing foam chemistries with lower global warming impact and enhanced product performance.














R Value

Initial:
6.5 at 1 inch thickness

Density

Free Rise:
3.10 lbs/ft3 (50 kg/m3)

Tack-Free Time 30-60 seconds
Cuttable 2-5 minutes
Fully Cured Time 1 hour
Cell Structure 95% CLOSED cell content
Fire Rating

ASTM E84 Class 1 (A) at 2" thick

Flame Spread: 15

Smoke Developed: 450

Shelf Life

12 months

Warning

 WARNING: CANCER AND REPRODUCTIVE HARM  - www.p65Warnings.ca.gov

Item Number
Description
Size
Dispensing Type
Yield
P12025

HandiFoam® High Density

II-60
Disposable
60 bdft (5.6 m2)
P12030

HandiFoam® High Density

II-115
Disposable
115 bdft (10.7 m2)
P12035

HandiFoam® High Density

II-340
Disposable
340 bdft (31.8 m2)

  • Insulation
    • Commercial & Industrial
      • Patch and repair roofs
    • Other
      • Post installation void filling (ie. hollow stadium seats)
      • Theater set design
      • Swimming pool construction
      • Statue repair
      • Statue creation
      • Taxidermy
      • Repairing and sealing damaged cargo containers
      • Filling post/pole holes
    • Residential
      • Air sealing attic
      • Bath tub insulation and leveling
      • Sealing attic baffles
      • Sealing can lights
      • Insulating & sealing rim/band joists


Use our Yield Calculator to determine how much low pressure polyurethane foam you need to complete your next project.

*Yields are based on theoretical calculations, for comparison purposes, and will vary depending on ambient conditions and particular application. Other two-component foam product yields are shown on the specific Technical Data Sheet. These examples are representative of other products of similar size.

  • This field is for validation purposes and should be left unchanged.